ICMP Types and Codes

The ‘icmp’ type name and its corresponding type codes are listed below. It would be helpful for managing ‘icmp’ in iptables.

Type	Name					Reference
----	-------------------------		---------
  0	Echo Reply				 [RFC792]
  1	Unassigned				    [JBP]
  2	Unassigned				    [JBP]
  3	Destination Unreachable			 [RFC792]
  4	Source Quench			 	 [RFC792]
  5	Redirect				 [RFC792]
  6	Alternate Host Address			    [JBP]
  7	Unassigned				    [JBP]
  8	Echo					 [RFC792]
  9	Router Advertisement			[RFC1256]
 10	Router Selection			[RFC1256]
 11	Time Exceeded				 [RFC792]
 12	Parameter Problem			 [RFC792]
 13	Timestamp				 [RFC792]
 14	Timestamp Reply				 [RFC792]
 15	Information Request			 [RFC792]
 16	Information Reply			 [RFC792]
 17	Address Mask Request                     [RFC950]
 18	Address Mask Reply			 [RFC950]
 19	Reserved (for Security)			   [Solo]
 20-29	Reserved (for Robustness Experiment)	    [ZSu]
 30	Traceroute				[RFC1393]
 31	Datagram Conversion Error		[RFC1475]
 32     Mobile Host Redirect              [David Johnson]
 33     IPv6 Where-Are-You                 [Bill Simpson]
 34     IPv6 I-Am-Here                     [Bill Simpson]
 35     Mobile Registration Request        [Bill Simpson]
 36     Mobile Registration Reply          [Bill Simpson]
 37     Domain Name Request                     [Simpson]
 38     Domain Name Reply                       [Simpson]
 39     SKIP                                    [Markson]
 40     Photuris                                [Simpson]
 41-255 Reserved				    [JBP]

Many of these ICMP types have a “code” field. Here we list the types
again with their assigned code fields.

Type    Name                                    Reference
----    -------------------------               ---------
  0     Echo Reply                               [RFC792]

        Codes
            0  No Code

  1     Unassigned                                  [JBP]

  2     Unassigned                                  [JBP]

  3     Destination Unreachable                  [RFC792]

	Codes
	    0  Net Unreachable
	    1  Host Unreachable
            2  Protocol Unreachable
            3  Port Unreachable
            4  Fragmentation Needed and Don't Fragment was Set
            5  Source Route Failed
            6  Destination Network Unknown
            7  Destination Host Unknown
            8  Source Host Isolated
            9  Communication with Destination Network is
               Administratively Prohibited
           10  Communication with Destination Host is
               Administratively Prohibited
           11  Destination Network Unreachable for Type of Service
           12  Destination Host Unreachable for Type of Service
           13  Communication Administratively Prohibited      [RFC1812]
           14  Host Precedence Violation                      [RFC1812]
           15  Precedence cutoff in effect                    [RFC1812]


  4     Source Quench                            [RFC792]
        Codes
            0  No Code

  5     Redirect                                 [RFC792]

        Codes
            0  Redirect Datagram for the Network (or subnet)
            1  Redirect Datagram for the Host
            2  Redirect Datagram for the Type of Service and Network
            3  Redirect Datagram for the Type of Service and Host

  6     Alternate Host Address                      [JBP]

        Codes
            0  Alternate Address for Host

  7     Unassigned                                  [JBP]

  8     Echo                                     [RFC792]

        Codes
            0  No Code

  9     Router Advertisement                    [RFC1256]

        Codes
            0  No Code

 10     Router Selection                        [RFC1256]

        Codes
            0  No Code

 11     Time Exceeded                            [RFC792]

        Codes
            0  Time to Live exceeded in Transit
            1  Fragment Reassembly Time Exceeded

 12     Parameter Problem                        [RFC792]

        Codes
            0  Pointer indicates the error
            1  Missing a Required Option        [RFC1108]
            2  Bad Length


 13     Timestamp                                [RFC792]

        Codes
            0  No Code

 14     Timestamp Reply                          [RFC792]

        Codes
            0  No Code

 15     Information Request                      [RFC792]

        Codes
            0  No Code

 16     Information Reply                        [RFC792]

        Codes
            0  No Code

 17     Address Mask Request                     [RFC950]

        Codes
            0  No Code

 18     Address Mask Reply                       [RFC950]

        Codes
            0  No Code

 19     Reserved (for Security)                    [Solo]

 20-29  Reserved (for Robustness Experiment)        [ZSu]

 30     Traceroute                              [RFC1393]

 31     Datagram Conversion Error               [RFC1475]

 32     Mobile Host Redirect              [David Johnson]

 33     IPv6 Where-Are-You                 [Bill Simpson]

 34     IPv6 I-Am-Here                     [Bill Simpson]

 35     Mobile Registration Request        [Bill Simpson]

 36     Mobile Registration Reply          [Bill Simpson]

 39     SKIP                                    [Markson]

 40     Photuris                                [Simpson]

      Code

        0       Reserved
        1	unknown security parameters index
        2	valid security parameters, but authentication failed
        3 	valid security parameters, but decryption failed

Thanks…

Post navigation

Arunlal A

Senior System Developer at Zeta. Linux lover. Traveller. Let's connect! Whether you're a seasoned DevOps pro or just starting your journey, I'm always eager to engage with like-minded individuals. Follow my blog for regular updates, connect on social media, and let's embark on this DevOps adventure together! Happy coding and deploying!

One thought on “ICMP Types and Codes

Leave a Reply

Your email address will not be published. Required fields are marked *